NET 200-ECM – 纳博特金陵科学技术有限公司



功能强劲的最新一代 Intel® Celeron® 处理器 J1900 (原代号为” Bay Trail-D “)。NET 200-ECM为机器自动化提供基于智能PC的EtherCAT控制器。 它集成了新汉的EtherCAT Master,NexECM,可在高达250μs的周期时间内进行实时通信。NET 200-ECM还提供用于CiA 402配置文件和内置EtherCAT API函数库,以缩短自动化用户的开发时间。

除了EtherCAT通信,NET 200-ECM具有高集成度,具有两个可选的mini-PCIe(可选GbE LAN,Wi-Fi,3.5G / 4G LTE或其他现场总线设备)模块和两个COM端口,这使得它成为一个灵活的控制器。NET 200-ECM是您的EtherCAT控制系统的理想控制器。


  • 集成NexECM的EtherCAT 技术, EtherCAT Master Class A,
  • EtherCAT 通讯周期可达 250 μs
  • 支持高等级 API为 CiA 402 简单介绍
  • 板载Intel® Celeron® J1900四核2.0GHz处理器
  • 双独立显示:DP,DVI-I
  • 3 x USB 2.0 & 1 x USB 3.0
  • 2 x RS232/422/485
  • 2 x Mini-PCIe 接口为可选Wi-Fi/3.5G/4G LTE/现场总线模块
  • 操作温度: -5 ~ 55摄氏度


  • NET 200 (P/N: A0J10020003X0)
    Front-access EtherCAT controller
    Image Selection
    NET 200-ECM WES7 32-bit & RTX2012 (P/N:88J10020000X0)
    NET 200-ECM WES7 32-bit & RTX2016 (P/N:88J10020001X0)
    NET 200-ECM WES7 64-bit & RTX2014 (P/N:88J10020002X0)
    NET 200-ECM WES7 64-bit & RTX64 3.0 (P/N:88J10020003X0)
  • 24V, 60W AC/DC power adapter w/o power cord
    (P/N: 7400060024X00)

EtherCAT Support Table

Feature NameShort DescriptionNexECMRtx
Basic Features
Service CommandsSupport of all commandsV
IRQ Field in DatagramUse IRQ information from Slave in datagram headerV
Slaves with Device EmulationSupport Slaves with and without application controllerV
EtherCAT State MachineSupport of ESM special behaviorV
Error HandlingChecking of network or slave errors, e.g. working counterV
Process Data Exchange
Cyclic PDOCyclic process data exchangeV
Network Configuration
Reading ENINetwork configuration taken from ENI fileV
Compare  Network
Compare configured and existing network configuration during boot-upV
Explicit Device IdentificationIdentification used for hot connect and
prevention against cable swapping
Station Alias AddressingSupport configured station alias in slave, i.e. enable 2nd Address and use itV
Access to EEPROMSupport routines to access EEPROM via ESC registerV
Mailbox Support
Support MailboxMain functionality for mailbox transferV
Mailbox pollingPolling mailbox state in slavesV
CAN Application Layer Over EtherCAT (CoE)
SDO Up/DownloadNormal and expedited transferV
Complete AccessTransfer the entire object (with all sub-indices) at onceV
Distributed Clocks
DCSupport of distributed clockV


  • EtherCAT 主站

    • Slave module no.: up to 64
    • Cycle time: up to 250μs
    • Synchronization error: ±50ns
    • Support CiA 402 standard protocol
  • CPU

    • Onboard Intel® Celeron® processor J1900 Quad Cord 2.0GHz
  • 内存

    • 4GB RAM (2 x DDR3L)
  • 显示

    • Dual independent display — DVI-I and DP
  • 前面板I/O

    • ATX power on/off switch
    • LEDs for HDD LED, batty LEDs, power LED, COM port TX/RX,5 x Programmable GPO LEDs
    • 1 x External SD card
    • 1 x SIM card holder
    • 1 x EtherCAT port, 1 x Intel® I210IT GbE LAN port
    • 1 x DP display output
    • 1 x DVI-I display output
    • 1 x USB 3.0 (900mA per each)
    • 3 x USB 2.0 (500mA per each)
    • 2 x RS232/422/485 support Auto Flow Control — Jumper-free setting on RS232/422/485 — Support 2.5KV isolation protection on COM1
    • 1 x 3-pic DC input, typical
  • 储存设备

    • 1 x 2.5″ SSD/HDD (SATA 2.0) –front accessible
    • 1 x SD card (data storage only)
    • 1 x mSATA
  • 扩展槽

    • 2 x mini-PCIe socket for optional Wi-Fi/3.5G/4G LTE/Fieldbus modules
  • 电源

    • Typical 24V DC input with ±20% range
    • 1 x Optional 24V, 60W power adapter
  • 尺寸

    • 85mm (W) x 157mm (D) x 214mm (H)
  • 结构

    • Aluminum and metal chassis with fanless design
  • 工作环境

    • Operating temperature: Ambient with air flow: -5°C to 55°C
      (according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
    • Storage temperature: -20°C to 80°C
    • Relative humidity: 10% to 95% (non-condensing)
    • Shock protection:
      — SSD: 20G, half sine, 11ms, IEC60068-2-27
      — CFast: 50G, half sine, 11ms, IEC60068-2-27
    • Vibration protection w/ CFast & SSD condition:
      — Random: 2Grms @ 5~500Hz, IEC60068-2-64
      — Sinusoidal: 2Grms @ 5~500Hz, IEC60068-2-6
  • 认证

    • CE
    • FCC Class A
  • 预装软件包

    • Operating system: Windows Embedded Standard 7
    • Real-time extension:
      — RTX2012/RTX2016 for 32-bit OS
      — RTX2014/RTX64 3.0 for 64-bit OS
    • EtherCAT Master: NexECM
    • EtherCAT configurator

Dimension Drawing